Army Body Fat Calculator (2026 Waist-to-Height Standard)
Check whether you meet the Army’s current body composition standard, a waist-to-height ratio under 0.55, and see your estimated body fat with the one-site tape formula the Army used until July 2026.
Result
Your waist-to-height ratio
—
Army standard: under 0.55
Results are estimates for information only, calculated in your browser. Nothing you enter is sent or stored.
How the Army body fat standard is calculated
The current standard: waist-to-height ratio
Since July 2026, Army Directive 2026-13 makes the waist-to-height ratio (WHtR) the only body composition standard for the Regular Army, Army National Guard and Army Reserve. It replaced the height and weight screening tables, the circumference-based tape test and the supplemental body fat assessments.
Waist-to-height ratio = waist at the navel ÷ height (same units)
Meets the standard: ratio under 0.55
Largest waist that meets it: just under 0.55 × height
The standard is the same for every age and for men and women. The Army measures Soldiers twice a year. A Soldier at 0.55 or above gets a confirmation measurement by a different team the same day, and if that also fails, is flagged and enrolled in the Army Body Composition Program. Army Fitness Test scores no longer exempt anyone from the measurement.
| Height | Waist must be under |
|---|---|
| 5 ft 0 in (60 in) | 33.0 in (83.8 cm) |
| 5 ft 2 in (62 in) | 34.1 in (86.6 cm) |
| 5 ft 4 in (64 in) | 35.2 in (89.4 cm) |
| 5 ft 6 in (66 in) | 36.3 in (92.2 cm) |
| 5 ft 8 in (68 in) | 37.4 in (95.0 cm) |
| 5 ft 10 in (70 in) | 38.5 in (97.8 cm) |
| 6 ft 0 in (72 in) | 39.6 in (100.6 cm) |
| 6 ft 2 in (74 in) | 40.7 in (103.4 cm) |
| 6 ft 4 in (76 in) | 41.8 in (106.2 cm) |
The old one-site tape test (used until July 2026)
From June 2023 the Army estimated body fat from a single abdominal measurement at the navel and body weight (ALARACT 046/2023 under AR 600-9). Many people still search for this “Army body fat calculator”, so the result panel shows it as an estimate. It is no longer the official test.
Men: body fat % = −26.97 − (0.12 × weight in lb) + (1.99 × abdomen in inches)
Women: body fat % = −9.15 − (0.015 × weight in lb) + (1.27 × abdomen in inches)
As in the official worksheet, the abdomen is rounded to the nearest half inch, weight to the nearest pound, and the result to the nearest whole percent.
| Age | Men | Women |
|---|---|---|
| 17–20 | 20% | 30% |
| 21–27 | 22% | 32% |
| 28–39 | 24% | 34% |
| 40 and older | 26% | 36% |
Worked example
A 25-year-old man who is 5 ft 10 in (70 in) tall, has a 34 in waist at the navel and weighs 180 lb:
Waist-to-height ratio = 34 ÷ 70 = 0.486, under 0.55, so he meets the standard
Largest waist that meets it: just under 0.55 × 70 = 38.5 in, so he has 4.5 in to spare
Old tape estimate: −26.97 − (0.12 × 180) + (1.99 × 34) = −26.97 − 21.6 + 67.66 = 19.09, so 19%, within the old 22% limit for ages 21–27
A 30-year-old woman, 5 ft 4 in (64 in), waist 30 in, 140 lb: ratio 30 ÷ 64 = 0.469 (meets the standard); old tape estimate −9.15 − 2.1 + 38.1 = 26.85, so 27%, within the old 34% limit for ages 28–39.
Assumptions and limitations
- This is an unofficial self-check. Only a measurement taken by your unit under the current directive counts for your record.
- Army.mil does not publish rounding rules for the new ratio, so this calculator uses your exact numbers and shows three decimals. A result close to 0.55 could go either way when measured officially.
- The one-site tape formula was rescinded in July 2026. It is shown because many people still compare against it, not because it is still used.
- Waist-to-height ratio and tape formulas are screening estimates. They do not measure body fat directly and can be off for very muscular or very lean people.
- Not affiliated with or endorsed by the U.S. Army or the Department of Defense.
Sources
- U.S. Army. Army modifies body composition program, adopts waist-to-height ratio (July 2026) (opens in a new tab)
- U.S. Army. The full measure: the Army’s new WHtR standard (September 2026) (opens in a new tab)
- U.S. Army. Army publishes new body fat assessment guidance (June 2023; one-site tape test, rescinded in 2026) (opens in a new tab)
Last reviewed:
Frequently asked questions
Since July 2026, the Army uses the waist-to-height ratio instead of a body fat percentage. Divide your waist measured at the navel by your height, in the same units. A result under 0.55 meets the standard, for all ages and for both men and women.
Measure your height and your waist around the belly button, both in inches or both in centimetres, then divide waist by height. For example, a 34 in waist and 70 in height gives 34 ÷ 70 = 0.486, which meets the standard. To find your limit, multiply your height by 0.55: your waist must be below that number.
No. Army Directive 2026-13, announced in July 2026, replaced the height and weight tables, the circumference-based tape test and the supplemental body fat assessments with the waist-to-height ratio.
For men: −26.97 − (0.12 × weight in pounds) + (1.99 × abdomen in inches). For women: −9.15 − (0.015 × weight in pounds) + (1.27 × abdomen in inches), with the abdomen measured at the navel. The result was rounded to a whole percent and compared with a maximum for your age group.
Under the old AR 600-9 standard, men were allowed 20% body fat at 17–20, 22% at 21–27, 24% at 28–39 and 26% at 40 and older. Women were allowed 30%, 32%, 34% and 36% for the same age groups.
Not any more. Under the 2026 directive, every Soldier is measured regardless of Army Fitness Test or Combat Field Test scores. The earlier exemption for high fitness scores no longer applies.
A different team takes a confirmation measurement the same day. If that is also 0.55 or higher, the Soldier is flagged and enrolled in the Army Body Composition Program until they meet the standard. The Army said no one would be separated for failing the ratio during the first 180-day review period.
